What it means
An ILS, or instrument landing system, is a radio system that guides an aircraft to the runway in poor weather. The localizer shows whether you are left or right of the runway centerline. The glide slope shows whether you are above or below the descent path, which is normally 3 degrees. A marker beacon or distance equipment tells you how far along the approach you are.[1][2]
Why it matters for student pilots
An ILS approach is a precision approach, with both lateral and vertical guidance. The FAA instrument rating checkride requires a precision approach flown to the decision altitude.[2][4]
Worked example
Example: an ILS approach, stage by stage
Here is a simplified ILS approach in a training airplane. The figures come from the FAA material on a Category I ILS and from the instrument rating test standards.[1][4]
- Tune and identify Set the localizer frequency, somewhere from 108.10 to 111.95 MHz. Then listen to the Morse code identifier: the letter I followed by three letters, such as I-DIA.[1][4]
- Brief the approach Read the decision height on the chart and check the NOTAMs. If the glide slope is out of service, the approach becomes a localizer approach without vertical guidance.[1][4]
- Join the localizer Turn onto the final course until the localizer needle centers. From full left to full right, the course is only 700 feet wide at the threshold, about 213 meters.[1]
- Capture the glide slope When the glide slope needle centers, set up the descent rate you planned. Stay on the path and never below it, to keep clear of obstacles and terrain.[1][4]
- Stay stable On the checkride, neither needle may move more than three quarters of full scale. This applies from the final approach fix to the decision height. Airspeed must stay within 10 knots of the target.[4]
- Decide On a Category I ILS, the lowest decision height is 200 feet, about 61 meters. If the required runway references are clearly in sight, you continue to land. If not, you start the missed approach at once.[1][4]
- Go around Fly the published missed approach. Its obstacle protection assumes you start it at the decision height and climb at least 200 feet per nautical mile.[5]
This is a simplified sequence for learning. A real approach follows the published chart, ATC instructions and the checklists of the aircraft.
Where you meet it in training
Instrument rating: the ILS is part of the precision approach task. On the FAA checkride, you fly it to the decision altitude in real or simulated instrument conditions. The examiner then chooses whether you land or go around.[4]
Ground study for the rating covers how to work out descent rates and how minimums change when equipment is inoperative. Both are knowledge items of the same task.[4]
Common misunderstandings
-
Often heard: An ILS lands the airplane by itself.
In fact: On a Category I ILS, the pilot must see the runway references at the decision height or go around. Categories II and III allow lower minimums but need special authorization and equipment.[1][4]
-
Often heard: The glide slope guides you right down to the runway.
In fact: Below the lowest decision height, the glide path may not be usable. From there on, the pilot flies by visual reference to the runway.[1]
-
Often heard: Decision altitude and decision height are the same number.
In fact: Decision altitude is measured above mean sea level. Decision height is measured above the runway threshold.[3]
Questions
What does Category I mean?
A Category I ILS has a decision height of 200 feet and needs a runway visual range of 2,400 feet. With touchdown zone and centerline lights, 1,800 feet is enough, about 549 meters. The same applies with an autopilot, flight director or head-up display.[1]
Can a runway have an ILS at both ends?
Yes. But where both ends have a complete ILS, the two systems are not in service at the same time.[1]
Practice it
Train it with the Abbreviations trainer in Practice, free with your account.
Abbreviations
Try it
A few questions from the Abbreviations trainer. No account needed, nothing is saved.
Sources
- FAA, Aeronautical Information Manual, Chapter 1, Section 1 (Navigation Aids), paragraph 1-1-9 (Instrument Landing System), checked 18 Nov 2026
- FAA, Pilot/Controller Glossary (I), Instrument Landing System, checked 18 Nov 2026
- FAA, Pilot/Controller Glossary (D), Decision Altitude and Decision Height, checked 18 Nov 2026
- FAA, Instrument Rating Airplane Airman Certification Standards (FAA-S-ACS-8C), Area I Tasks B and C, Area VI Task B, checked 18 Nov 2026
- FAA, Aeronautical Information Manual, Chapter 5, Section 4 (Arrival Procedures), paragraph 5-4-21 (Missed Approach), checked 18 Nov 2026