What it means
A flight level is a height given in hundreds of feet, measured with a standard pressure setting on the altimeter. "Flight level 350" means an altimeter reading of 35,000 feet on that setting. Aircraft at high altitude share this setting, so their altimeters err in the same way. That helps keep vertical separation.[1][6]
Why it matters for student pilots
You will hear and use flight levels in radio calls. Knowing when to switch between them and the local pressure setting is a basic altimeter rule.[2][3]
Worked example
Example: climbing into the flight levels in the United States
This climb follows the US altimeter rules, with made-up numbers.[2]
- Below 18,000 feet You fly with the current altimeter setting of a station along your route, within 100 nautical miles.[2]
- At 18,000 feet You set 29.92 inches of mercury. That standard setting equals 1013.2 hectopascals.[1][2]
- Saying it From here on you say "flight level" and then each digit. FL 190 is "Flight Level One Niner Zero", a reading of 19,000 feet on the standard setting.[1][3]
- A low pressure day When the local setting is below 29.92, the lowest usable flight level rises. With a setting from 29.91 to 29.42, it is FL 185.[2]
This climb is a teaching example. It is not a flight plan, and other countries switch at other heights.
Where you meet it in training
For the FAA private pilot, ground training covers the regulations on flight operations. The altimeter rule in 14 CFR 91.121 is one of them.[7][2]
Common misunderstandings
How EASA, FAA and CASA differ
- FAA
- The switch to flight levels happens at 18,000 feet. At and above that height, every altimeter is set to 29.92.[2]
- CASA
- In Australian airspace the transition altitude is 10,000 feet. The first flight level above it depends on the area pressure setting (QNH): FL 110 when it is 1013.2 hPa or higher. Aircraft may not cruise in the layer between.[4]
- EASA
- EU rules use flight levels above the transition altitude but do not fix one height for it. Their VFR table even allows for a transition altitude below 10,000 feet.[5]
Practice it
Train it with the Phonetic alphabet trainer in Practice, free with your account.
Phonetic alphabet
Try it
A few questions from the Phonetic alphabet trainer. No account needed, nothing is saved.
Sources
- FAA, Pilot/Controller Glossary, F (Flight level, and the ICAO definition with its note on QNH, QFE and 1013.2 hPa), checked 18 Nov 2026
- eCFR, 14 CFR 91.121 (Altimeter settings), checked 18 Nov 2026
- FAA, Aeronautical Information Manual, Chapter 4, Section 2 (4-2-9, Altitudes and Flight Levels), checked 18 Nov 2026
- CASA, Part 91 (General Operating and Flight Rules) Manual of Standards 2020, compilation of 9 July 2026, section 11.02 (Transition altitude, transition layer and transition level), checked 18 Nov 2026
- EASA, Easy Access Rules for Standardised European Rules of the Air, SERA.3110 and SERA.5001 (Cruising levels; VMC table note on the transition altitude), checked 18 Nov 2026
- FAA, Pilot's Handbook of Aeronautical Knowledge (FAA-H-8083-25C), Chapter 8 (Flight Instruments), checked 18 Nov 2026
- eCFR, 14 CFR 61.105 (Aeronautical knowledge), checked 18 Nov 2026