Skip to main content
Aviation Connect
Log in Sign up free
A pilot in flight holds a chart and a plotter on the knee, a river valley below the window.

Aviation A to Z

Readback

Last checked November 2026

What it means

A readback is when a pilot repeats an instruction from air traffic control. It lets the controller check that the pilot understood correctly. Runways, altitudes and headings are the core items, and EU rules add frequencies and transponder codes.[1][2][4]

Why it matters for student pilots

A readback catches a misheard number before it becomes a wrong altitude or a wrong runway. The controller listens to it and corrects any mistake at once.[2][4]

Worked example

Example: an instruction and its readback

The exchange below is invented. Its pattern follows the FAA's guidance on readbacks.[2]

  1. ATC says "Cessna Four One Two Juliett, turn left heading two seven zero, climb and maintain four thousand, squawk four two one five."[2]
  2. You say "Left heading two seven zero, climb and maintain four thousand, squawk four two one five, Cessna Four One Two Juliett."[2]
  3. Why this way You repeat the numbers in the order you heard them and add your callsign. The callsign shows the controller that the right aircraft took the instruction.[2]
  4. Hold short A hold short instruction for a runway is always read back. Controllers are required to get that readback from you.[3]

The exchange is a practice script, not a recording of a real flight.

Where you meet it in training

At a towered airport, readbacks start on the ground. With taxi instructions, you read back the runway and any instruction to enter or hold short of a runway.[3]

Both the FAA private pilot test and the instrument rating test check that you read back clearances correctly.[5][6]

Common misunderstandings

  • Often heard: Saying "roger" is enough.

    In fact: "Roger" only means you received the whole message. For altitudes, headings and runways, the controller needs to hear the numbers back.[1][2]

How EASA, FAA and CASA differ

FAA
FAA guidance asks pilots to read back altitudes, vectors and runway assignments. Readbacks of runway hold short instructions are required.[2][3]
EASA
EU rules require a longer list. It includes route and runway clearances, the runway in use, altimeter settings and transponder codes. New frequencies, level, heading and speed instructions and transition levels are on it too.[4]

Practice it

Train it with the Aviation English listening trainer in Practice, free with your account.

Aviation English listening

Try it

A few questions from the Aviation English listening trainer. No account needed, nothing is saved.

Free for students: pilot aptitude test, daily practice and school match.