Skip to main content
Aviation Connect
Log in Sign up free
A pilot in flight holds a chart and a plotter on the knee, a river valley below the window.

Aviation A to Z

Density Altitude

Last checked November 2026

What it means

Density altitude is pressure altitude corrected for nonstandard temperature. It is the altitude at which the airplane performs, whatever the altimeter shows. High elevation, low pressure, heat and humidity all raise it.[1][3]

Why it matters for student pilots

High density altitude reduces engine power, propeller thrust and wing lift. Takeoff and landing rolls get longer, and the rate of climb drops.[2]

Worked example

Example: a hot afternoon at a 2,000 ft airport

An invented airport sits at 2,000 ft. This example uses the FAA standard atmosphere and the FAA rule-of-thumb chart.[1][3]

  1. Pressure altitude Set 29.92 inHg and the altimeter shows pressure altitude. With a local setting of 29.72, pressure altitude is about 2,200 ft, because pressure falls about 1 inch per 1,000 ft.[1]
  2. Standard temperature The standard is 15 °C at sea level, falling about 2 °C per 1,000 ft. At 2,000 ft that gives about 11 °C, shown as 52 °F on the chart.[1][3]
  3. Hot day The FAA rule-of-thumb chart shows the effect of temperature alone. For a 2,000 ft airport on a 100 °F afternoon, it gives about 5,000 ft, or about 1,524 m. Today's low pressure pushes the real value a bit higher.[3][1]
  4. What it means The airplane performs as if the airport were at 5,000 ft. You use your airplane's performance charts with those conditions.[3]
  5. Humid air If the air is also humid, the FAA suggests adding 10 percent to the computed takeoff distance.[3]

The airport and the weather are invented for learning. Use your own airplane's charts for real planning.

Where you meet it in training

The effect of density altitude on takeoff and climb is a knowledge area for the FAA private pilot.[4]

At US airports, the ATIS may broadcast a check density altitude advisory when it applies.[2]

Common misunderstandings

  • Often heard: The airspeed indicator will warn me about thin air.

    In fact: It will not. You fly the normal indicated speeds, but true airspeed and groundspeed are higher, so you need more runway.[2]

Questions

What time of day is best when performance is tight?

The cool hours, early morning or late afternoon, when temperatures stay near normal.[3]

Free for students: pilot aptitude test, daily practice and school match.