Skip to main content
Aviation Connect
Log in Sign up free
An instructor and a young pilot talk at a table in a hangar, a trainer with its cowling open behind.

Aviation A to Z

Cross-Country Flight

Last checked November 2026

What it means

A cross-country flight goes from one airport to another along a planned route, with navigation on the way. EASA defines it as a flight between a point of departure and a point of arrival following a pre-planned route. For FAA license hours, a landing point must be more than 50 nautical miles in a straight line from the start.[1][2]

Why it matters for student pilots

The FAA, EASA and CASA private licenses all ask for solo cross-country time. On these flights you plan, navigate and land at other airports with no instructor on board.[3][4][5]

Worked example

Example: planning a 150 NM solo cross-country

Here is an invented triangle from home airport A, with full-stop landings at B and C and a return to A.[4]

  1. A to B 62 NM. One leg of more than 50 NM in a straight line is what the FAA rule asks for.[3]
  2. B to C 48 NM, with a full-stop landing at C.[4]
  3. C to A 55 NM, back home.[4]
  4. Total 62 plus 48 plus 55 gives 165 NM, about 306 km. That is more than the EASA minimum of 270 km (150 NM).[4]
  5. Planning Before you go, you work out headings, groundspeed, time, fuel with a reserve and the arrival time in UTC.[6]

The airports and distances are invented for learning, not a plan for a real flight.

Where you meet it in training

A solo endorsement alone does not allow a solo cross-country. The FAA asks for a separate cross-country endorsement from your instructor.[7]

On every solo cross-country, an FAA student pilot carries the logbook and the student pilot certificate.[8]

On the FAA private pilot checkride, cross-country flight planning is a task of its own.[6]

How EASA, FAA and CASA differ

FAA
Private pilot: at least 5 hours of solo cross-country time. One flight must cover 150 NM in total, with full-stop landings at three points and one leg of more than 50 NM.[3]
EASA
PPL(A): at least 5 hours of solo cross-country time. One flight must cover at least 270 km (150 NM), with full-stop landings at two airports other than the one you left from.[4]
CASA
PPL airplane: at least 5 hours of solo cross-country time. One flight must cover at least 150 NM, with full-stop landings at 2 airports outside the home training area.[5]

Practice it

Train it with the Go or no-go trainer in Practice, free with your account.

Go or no-go

Try it

A few questions from the Go or no-go trainer. No account needed, nothing is saved.

Free for students: pilot aptitude test, daily practice and school match.